Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 90
Command Level Description Example
server timeout.
8021x misc
maxrequest
[number]
G The 802.1x misc max request
global configuration command
is used to set the MAX
requests.
switch(config)# 8021x misc
maxrequest 3
8021x misc
reauthperiod
[sec.]
G The 802.1x misc reauth
period global configuration
command is used to set the
reauth period.
switch(config)# 8021x misc
reauthperiod 3000
8021x
portstate
[disable | reject
| accept |
authorize]
I The 802.1x port state
interface configuration
command is used to set the
state of the selected port.
switch(config)#interface
fastethernet 3
switch(config-if)#8021x
portstate accept
show 8021x E Displays a summary of the
802.1x properties and the port
states.
switch>show 8021x
no 8021x G Disable 802.1x function switch(config)#no 8021x
The following table lists the TFTP Commands.
Command Level Description Example
backup
flash:backup_
cfg
G Save configuration to TFTP
server. Must specify the IP
address of the TFTP server
and the file name.
switch(config)#backup
flash:backup_cfg
restore
flash:restore_
cfg
G Upload configuration from
TFTP server. Must specify
the IP address of the TFTP
server and the file name.
switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_
fw
G Upgrade firmware from the
TFTP server. Must specify
the IP address of TFTP server
and the file name.
switch(config)#upgrade
lash:upgrade_fw