Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 89
The following table lists the commands for the 802.1x Security functions.
Command Level Description Example
8021x enable G The 802.1x global
configuration command is
used to enable 802.1x
protocols.
switch(config)# 8021x
enable
8021x system
radiusip
[IP address]
G The 802.1x system radius IP
global configuration command
is used to change the radius
server IP.
switch(config)# 8021x
system radiusip 192.168.1.1
8021x system
serverport
[port ID]
G The 802.1x system server
port global configuration
command is used to change
the radius server port
switch(config)# 8021x
system serverport 1815
8021x system
accountport
[port ID]
G The 802.1x system account
port global configuration
command is used to change
the accounting port
switch(config)# 8021x
system accountport 1816
8021x system
sharekey
[ID]
G The 802.1x system share key
global configuration command
is used to change the shared
key value.
switch(config)# 8021x
system sharekey 123456
8021x system
nasid
[words]
G The 802.1x system nasid
global configuration command
is used to change the NAS ID
switch(config)# 8021x
system nasid test1
8021x misc
quietperiod
[sec.]
G The 802.1x misc quiet period
global configuration command
is used to specify the quiet
period value of the switch.
switch(config)# 8021x misc
quietperiod 10
8021x misc
txperiod
[sec.]
G The 802.1x misc TX period
global configuration command
is used to set the TX period.
switch(config)# 8021x misc
txperiod 5
8021x misc
supportimeout
[sec.]
G The 802.1x misc supp timeout
global configuration command
is used to set the supplicant
timeout.
switch(config)# 8021x misc
supportimeout 20
8021x misc
servertimeout
[sec.]
G The 802.1x misc server
timeout global configuration
command is used to set the
switch(config)#8021x misc
servertimeout 20