Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 88
Command Level Description Example
[Group Name ]
security-level
[NoAuthNo
Priv|AuthNoPriv
|AuthPriv]
match-rule
[Exact|Prifix]
views
[Read View
Name] [Write
View Name]
[Notify View
Name]
no snmpv3
mibview view
[View Name]
type
[Excluded|
Included]
sub-oid
[OID]
G Remove specified mibview
table of SNMPV3 agent.
switch(config)#no snmpv3
mibview view V1 type
Excluded sub-oid 1.3.6.1
The following table lists the commands for Port Mirroring.
Command Level Description Example
monitor rx G Set RX destination port for
monitor function
switch(config)#monitor rx
monitor tx G Set TX destination port for
monitor function
switch(config)#monitor tx
show monitor P Displays port monitor
information
switch#show monitor
monitor
[RX|TX|Both]
I Configure source port for
monitor function
switch(config)#interface
fastEthernet 2
switch(config-if)#monitor RX
show monitor I Displays port monitor
information
switch(config)#interface
fastEthernet 2
switch(config-if)#show
monitor
no monitor I Disables source port of
monitor function
switch(config)#interface
fastEthernet 2
switch(config-if)#no monitor