Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 86
Command Level Description Example
[System
Location]
snmp system-
contact
[System
Contact]
G Set SNMP agent system
contact
switch(config)#snmp
system-contact where
snmp
agent-mode
[v1v2c|v3|v1v2
cv3]
G Select the agent mode of
SNMP
switch(config)#snmp
agent-mode v1v2cv3
snmp
community-
strings
[Community]
right
[RO/RW]
G Enter the SNMP community
string.
switch(config)#snmp
community-strings public
right rw
snmp-server
host
[IP address]
community
[Community-
string]
trap-version
[v1|v2c]
G Configure SNMP server host
and community string
switch(config)#snmp-server
host 192.168.1.50
community public
trap-version v1
(remove)
Switch(config)#
no snmp-server host
192.168.1.50
snmpv3
context-name
[Context
Name ]
G Configure the context name switch(config)#snmpv3
context-name Test
snmpv3 user
[User Name]
group
[Group Name]
password
[Authentication
Password]
[Privacy
Password]
G Configure the user profile for
SNMPV3 agent. Privacy
password can be left empty.
switch(config)#snmpv3 user
test01 group G1 password
AuthPW PrivPW
snmpv3 access
context-name
[Context
Name ]
group
G Configure the access table of
SNMPV3 agent
switch(config)#snmpv3
access context-name Test
group G1 security-level
AuthPriv
match-rule Exact views V1