Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 55
Figure 5.32 – SNMP Configuration
5.24.2 Trap Configuration
A trap manager is a management station that receives traps or system alerts generated
by the switch. If a trap manager is not defined, no traps received. Create a trap
manager by entering the IP address of the station and a community string. To define a
trap manager, enter the following information.
 IP Address - enter the IP address of the trap manager.
 Community - enter the community string.
 Trap Version - select the SNMP version – v 1 or v2.
 Click Add - to save the settings.
 To remove the community string, select the community string to be removed and click
Remove. The default community string cannot be removed.