Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 44
o Both – RX and TX packet
 Source port – select the ports to be monitored. All monitored port traffic will be
copied to the mirror port. You can select a maximum of 10 monitor ports in the
switch. You can choose the port to monitor in only one mirror mode. Select the
mirroring port state:
o RX – RX packet only
o TX – TX packet only
o Both – RX and TX packet
 Click Apply to confirm the settings.
Note: To disable the function, set the monitor port to none.
Figure 5.22 - Port Mirroring Screen