Specifications

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 21
Connecting a Terminal or PC to the Console Port
Use the supplied RS-232 cable to connect a terminal or PC to the console port. The
terminal or PC to be connected must support the terminal emulation program.
After the connection between switch and PC is made, run a terminal emulation
program or Hyper Terminal to match the following default characteristics of the console
port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: None
Stop Bit: 1
Flow Control: None
Figure 4.4 - Communication Parameters
1. Press Enter once you have entered the parameters listed above.
2. Turn on the switch. The switch will display a series of messages as it performs a
self test. Once the self test is completed, the login screen will be displayed.
Figure 4.5 - Console Login Interface