Specifications

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 91
The following table lists the QoS Commands.
Command Level Description Example
qos policy
[weighted-fair|stri
ct]
G Select QOS policy scheduling switch(config)#qos policy
weighted-fair
qos prioritytype
[port-based|cos-
only|tos-only|cos
-first|tos-first]
G Use this command to set QOS
priority type
switch(config)#qos prioritytype
qos priority
portbased
[Port]
[lowest|low|middl
e|high]
G Use this command to configure
port-based priority
switch(config)#qos priority
portbased 1 low
qos priority cos
[Priority][lowest|l
ow|middle|high]
G Use this command to configure
COS priority
switch(config)#qos priority cos
22 middle
qos priority tos
[Priority][lowest|l
ow|middle|high]
G Configure TOS priority switch(config)#qos priority tos
3 high
show qos P Displays the QoS configuration switch>show qos
no qos G Disables QoS function switch(config)#no qos
The following table lists the IGMP Commands.
Command Level Description Example
igmp enable G Enables IGMP snooping function switch(config)#igmp enable
Igmp-query auto G Set IGMP query to auto mode switch(config)#Igmp-query
auto
Igmp-query force G Set IGMP query to force mode switch(config)#Igmp-query
force
show igmp
configuration
P Displays the details of the IGMP
configuration.
switch#show igmp
configuration
show igmp multi P Displays the details of the IGMP
snooping entries.
switch#show igmp multi
no igmp G Disables IGMP snooping
function
switch(config)#no igmp
no igmp-query G Disable IGMP query switch#no igmp-query
The following table lists the MAC/Filter Table Commands.
Command Level Description Example
mac-address-tab
le static hwaddr
[MAC]
I Configure static MAC address
table.
switch(config)#interface
fastEthernet 2
switch(config-if)#mac-address-t