Specifications

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 70
o Coupling Port - select the member port.
o Control Port - select the switch as the master switch in the coupling ring.
Enable Dual Homing – Dual homing only works when X-ring is enabled. To
enable the dual homing function, set up one port as the dual homing port. Only one
port can be the dual homing port. Dual-homing provides reliability for your network
by allowing a device to be connected to the network by way of two independent
connection points. One access point is the operating connection and the other is a
standby or back up connection that is activated in case the operating connection
fails.
 Click Apply to save the configuration.