Specifications

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 59
 Priority - decide which port should be blocked by priority in LAN. Enter a
number 0 through 240. The value of priority must be a multiple of 16.
 Admin P2P - some of the rapid state transactions that are possible within
RSTP are dependent upon whether the port concerned can only be
connected to exactly one other bridge (i.e. it is served by a point-to-point
LAN segment), or can be connected to two or more bridges (i.e. it is served
by a shared medium LAN segment). This function allows the P2P status of
the link to be manipulated administratively. True equals P2P enabled.
False equals P2P disabled.
 Admin Edge - the port directly connected to end stations cannot create a
bridging loop in the network. To configure the port as an edge port, set the
port to True.
 Admin Non Stp - the port includes the STP mathematic calculation. True
does not include STP mathematic calculation. False includes the STP
mathematic calculation.
2. Click
Apply
.