Specifications

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 50
5.22 Rate Limiting
Rate limiting allows you to set up the bandwidth rate and packet limitation type per port.
 Ingress Limit Packet Type – select the packet type to be filtered. The packet types
include four types of packets: all, broadcast/multicast/flooded, unicast packets,
broadcast/multicast packets, and broadcast only packets. The egress rate supports
all types of packets.
 All ports support port ingress and egress rate control. For example, if Port 1 is
10Mpbs, users can set its effective egress rate at 1Mbps and ingress rate is 500kbps.
The switch performs the ingress rate by packet counter to meet the specified rate.
 Ingress – enter the port effective ingress rate. The default value is 0.
 Egress – enter the port effective egress rate. The default value is 0.
 Click Apply to confirm the settings.
Figure 5.22 – Rate Limiting