Specifications

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 43
oversize, CRC align errors, fragments and jabber packets)
 TX Abort Packet - counts the aborted packet during transmission
 Packet Collision – counts the dropped packets
 TX Bcast Packet – counts the broadcasted packets
 Rx Mcast Packet – counts the multicast packets
The clear button will clean out all counts.
Figure 5.16 – Port Statistics
5.17 Port Control
The section of this screen is used to configure each port. The bottom section displays
the current settings for each port.
 Port - Select the port that you want to configure.
 State - Current port status. The port can be set to disable or enable mode. If a port is
set to disable, it will not be able to receive or transmit packets.
 Negotiation - Set auto negotiation status of the port. There are two choices, auto
and force. If you set negotiation to force, the speed and duplex modes must be set
manually.
• Speed – Available when negotiation is set to Force.
• Duplex – Available when negotiation is set to Force .
 Flow Control – Flow control is set to Enable or Disable. When enabled, once the