Specifications

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 37
Figure 5.12 – System Event Log
5.13 SNTP Configuration
Use this menu to configure the Simple Network Time Protocol (SNTP) settings. The
SNTP synchronizes the switch clock with the Internet.
 SNTP Client – set the SNTP function to enable or disable. SNTP is disabled by
default.
 Daylight Savings Time - enable or disable the daylight savings time function.
When daylight saving time is enabled, you must also set the daylight savings time
period.
 UTC Timezone - set the switch location time zone. Use the following table as a
reference for the different time zone locations.