Specifications

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 32
Figure 5.7 - Update Firmware Screen
5.8 Restore Configuration
You can restore the EEPROM value from the TFTP server. Before restoring, you must
load the image file on the TFTP server so the switch can download the flash image.
1. Fill in the TFTP server IP address.
2. Enter the correct Restore File Name.
3. Click Apply to proceed.
Figure 5-8 - Restore Configuration Screen
5.9 Backup Configuration
This menu allows you to save the current EEPROM value from the switch to the TFTP
server.
1. Fill in the TFTP server IP address.
2. Enter the correct Backup File Name.
3. Click Apply to proceed.