Specifications

Waters Network Systems User’s Manual Page 61
GSM-2108/GSM-1008SFP
Parameter description:
VLAN Name:
Valid letters are A-Z, a-z, 0-9, “
- “ and “_” characters. The maximum, length is 15 characters.
Member:
Used to enable or disable a member port. Enable means the port is a member of the VLAN.
Select the check box (
;) beside the port x to enable it.
Figure 5.33 – Port-based Group
Add Group:
Create a new port-based VLAN. Input the VLAN name and choose the group member by
selecting the check box beside the port number. Select Apply so the setting will take effect.
Figure 5.34 – Port-based VLAN
Delete Group:
Use Delete to remove the selected group entry from the port-based group table.