Specifications

Waters Network Systems User’s Manual Page 38
GSM-2108/GSM-1008SFP
Vcc:
Displays the working DC voltage of SFP module.
Mon1(Bias) mA:
Displays the Bias current of SFP module.
Mon2(TX PWR):
Displays the transmit power of SFP module.
Mon3(RX PWR):
Displays the receiver power of SFP module.
5.8.2 Port Configuration
Port Configuration is used to modify the setting by port. This function allows set and reset the
functions described below.
Figure 5.12 – Port Configuration
Function name:
Port Configuration
Function description:
Used to set the operation mode of each port. The switch supports three parameters for each port:
 State
 Mode
 Flow control.
Parameter description:
State:
The communication capability of the port is Enabled or Disabled. When enabled, traffic can be