Owner`s manual

16 17
Lay the unit flat and remove the tank stopper from between the top and
bottom deck. Use the included syphon pump (or a hose if available) to fill
the tank to the desired level with municipal water.
Insert one purification tablet (provided) now and every six months.
Additional purification tablets are available upon request at:
www.waterrowerservice.com/puritabs
Once completed, insert the Tank Stopper; it may be necessary to moisten
the Stopper to assist with replacement.
►Please wipe excess water from wooden components after filling
STEP 09
Before filling the tank and rowing, ensure that the recoil belt passes
smoothly over all pulleys.
STEP 10
Misaligned
Aligned
1) To pump water, turn the knob clockwise to close valve as shown in
figure A
2) Locate water source above (higher than) water destination:
▪ See Figure B for filling tank
▪ See Figure C for emptying tank
3) Squeeze pump 4-5 times until water flows
4) Turn knob counter-clockwise to allow air into the pump and
end syphon.
HOW TO FILL AND EMPTY THE TANK
A B C
WATER LEVEL
The Level Gauge is positioned on the side of the tank. Information on
the sticker includes WaterRower contact information and the Water
Level Gauge. The maximum level to fill the tank is Level 19. DO NOT fill
above the maximum level - this could void the warranty. The standard
Calibration Level is Level 17.