Owner`s manual

14 15

STEP 5

STEP 6

Press the heelrest adjustment button (A) and insert the heelrest/footpads

under the footboard cover plate (B). Release the button to ‘lock’ the

heelrests rests into place. You can adjust the height of

the heelrests according to your foot size (refer to page 5 of the Owner’s

Manual).

Heelrests

Place the footboard between the rails positioning the top two holes

over the two threaded holes in the tank unit. It may be necessary to

slightly loosen the two bolts on the Top Deck (B) to allow the footboard

clearance. Insert the JCN Nuts and JCB Bolts attaching the Footboard

to the Rails at A. Screw the Handle Rests into position using the Handle

Rest Bolts (C); do not over tighten. *Should you experience any problem

with aligning the components, loosen all the fasteners, align and

re-tighten.

Top Deck Bolts

Handle Rest Bolt

(x2)

Handle Rest

(x2)

JCN Nut

(x4)

JCB Bolt

(x4)

Press Button

to Adjust

STEP 7

Undo the Dolley Wheel Assembly and fix to the rail in the order shown

and tighten. Note - the wheel goes on the outside of the Rail.

STEP 8

Stand the WaterRower upright. Release the recoil belt which is wrapped

around the bracket at the base of the machine. Ensure that the recoil

belt is passing over all guide pulleys. Connect the bungee to the recoil

strap by hooking the bungee hook through the recoil belt D-ring.

Tank

Rail

Bungee

Recoil Belt