Quick Start Guide

WP-400 Series

QUICK START GUIDE

Unit Prep

(First time use only)

Charge Unit for 24 Hours

Prior to First Use.

Turn power switch OFF (O),

plug power cord into outlet,

and insert the charging cord

into the unit.

Select the appropriate tip and insert

into the unit. Press firmly until the

tip clicks into place. To remove tip,

push the tip eject button.

Unplug charging cord from

unit prior to filling with

water and during use. Lift

the flip top on reservoir

and fill with lukewarm

water. Refill as needed.

OFF

Plug in

CAUTION:

Do not press tip eject

button while unit is

running.

Remove

plug

PAGE 1
QUICK START GUIDE WP-400 Series 1 Unit Prep (First time use only) Charge Unit for 24 Hours Prior to First Use. Turn power switch OFF (O), plug power cord into outlet, and insert the charging cord into the unit. OFF Select the appropriate tip and insert into the unit. Press firmly until the tip clicks into place. To remove tip, push the tip eject button. CAUTION: Do not press tip eject button while unit is running. Plug in Unplug charging cord from unit prior to filling with water and during use.
PAGE 2
QUICK START GUIDE WP-400 Series 2 Pressure Setting 3 Water Floss For first time use, adjust the pressure setting to the LOW (I) setting. LOW Keep unit upright during use to ensure continuous water flow. Lean over sink and close lips enough to prevent splashing, while still allowing water to flow from mouth into the sink. Turn unit ON (I). To increase water pressure move to HI (II) setting. 4 Technique Aim water at a 90° angle to your gumline. Follow the gumline and pause briefly between teeth.