Instructions / Assembly

Instruction Manual
Functions:
1. Hydraulic drive, no external power supply, and no battery.
2. Water temperature display: Determine which temperature is comfortable.
3. Water usage: displays the water usage. After turning off the water for 30 minutes, the data is cleared
automatically, for the next shower to recount. Water usage displays for 7 seconds and temperature displays
for 3 seconds intervals.
4. The light shows different color according to different temperatures,
4.1. Water temperature ＜ 90°F(32℃) - Blue light.
4.2. Water temperature between 90 -108°F (32℃-40℃) - Green light.
4.3. Water temperature is between 108 -122°F(42℃-50℃) - Red light.
4.4. Water temperature > 122°F (50°C) - flashing Red light.
5. Water temperature must not be more than 158 F.
Specifications:
Material：ABS Weight：0.15 kg
Working pressure：0.1Mpa-0.5Mpa Temperature range：50℉-122℉
Temperature accuracy：±1℉ Thread: G1/2
Dimension：
Installation instructions:
1. Before installation, close the faucet mixing valve, connect the showerhead to the shower arm, and check for
any water leakage. Plumbers tape may be needed.
2. This product optimally functions with water pressure 14.5psi- 80 psi, if the water pressure is too high, please
open the faucet slowly.
Installation diagram:
Put the washer into the shower, and tighten showerhead to the arm.
Water temperature and Water usage
are alternating to display
Temperature colorful lighting