Instructions / Assembly

Step 5:
Connect Tubing
NOTE:
• Conrm the tubing length you need rst. Then cut the tubing if it is too long,
referring to “How to Use the Quick-Connect Fittings” on page 4.
• Before connecting the PE tubing to the system, remove the plug from the water
port. Press and hold the lock sleeve while pulling out the plug.
2. Install the Outlet Water Tubing
Inlet Water Port
3. Install the Drain Tubing
• Connect the red 1/4" PE tubing to the drain saddle.
• Insert the other end of the tubing into the drain port and pop the lock clip on the
tting.
NOTE: Make sure it is fully inserted to the point where you reach the mark on
the tubing.
1. Install the Inlet Water Tubing
• Identify the white 1/4" PE tubing that has been connected to the feed water
adapter.
• Insert the other end of the tubing into the inlet water port and pop the lock clip
on the tting.
NOTE: Make sure it is fully inserted until you reach the mark on the tubing.
Inlet Water
Tubing
Lock Clip
8
Feed Water
Adapter
Inlet Water Tubing
• Identify the blue 1/4” PE tubing.
• Insert the other end of the tubing into the outlet water port and pop the lock clip
on the tting.
NOTE: Make sure it is fully inserted until you reach the mark on the tubing.
Outlet Water
Tubing
Lock Clip
Outlet Water Port