Instructions / Assembly

6
Step 2:
Install the Faucet
NOTE: If there is no hole in
your kitchen sink or countertop,
you have to drill one (1⅜")
or use the hole in the soap
dispenser. Refer to Page 4.
3/8"
Cold Water Pipe
1/2"
Cold Water Pipe
Washer
Converter
Unscrew
1/4'' Inlnet Water
Tubing
Feed Water
Adapter
Cold Water
Supply Valve
Figure 4 Figure 5
Screw
B
A
Faucet Body
Countertop
Mounting Washer 1
Mounting Washer 3
Quick-Connect Fitting
Faucet Spout
Faucet Stem
Mounting Washer 2
Nut
Faucet Power Cord
1. Insert the faucet stem
and power cord into
mounting washer 1.
2. Insert the faucet stem
and power cord into the
hole on the countertop.
Fix mounting washer 1
on the countertop.
3. Under the sink, put
mounting washer 2 and 3
on the faucet stem. Slip
on the nut and tighten it.
4. Insert one end of the
blue 1/4” PE tubing into
the quick-connect tting
on the faucet and pop in
the lock clip on the tting.
*Mounting Washer 1 Mounting Washer 2 Mounting Washer 3
Outlet Water Tubing
*NOTE: Please use the black mounting washer that has the groove. You
won’t need the other black mounting washer.