Owner`s manual

23
1-1/4" & 1-1/2" PVC SOLVENT
Item
No.
Part No. Description Qty.
CV3007-07 1-1/4" & 1-1/2" PVC solvent assembly 2
1 CV3151 Nut, 1" quick connect 2
2 CV3150 Split ring 2
3 CV3105 O-ring 215 2
4 CV3352 Fitting 2
1-1/4" & 1-1/2" BRASS SWEAT
Item
No.
Part No. Description Qty.
CV3007-09 1-1/4 & 1-1/2" brass sweat assembly 2
1 CV3151 Nut, 1" quick connect 2
2 CV3150 Split ring 2
3 CV3105 O-ring 215 2
4 CV3375 Fitting 2
IMP-844 IMP-1044 IMP-1054 IMP-1354 IMP-1465
IMP-1465-
IMP-1665
IMP-1665-
IMPC-835 IMPC-1035
MODEL 1.25" 1.25"
1
Capacity: Maximum 25,600 @ 9.0 32,000 @ 15.0 48,800 @ 21.0 72,800 @ 24.0 91,000 @ 30.0 91,000 @ 30.0 120,000 @ 39.0 120,000 @ 39.0 21,100 @ 9.0 32,000 @ 15.0
(Grains/Lbs. NaCI) Medium 21,600 @ 6.0 28,400 @ 9.0 44,400 @ 15.0 64,200 @ 18.0 85,500 @ 24.0 85,500 @ 24.0 107,000 @ 30.0 107,000 @ 30.0 18,000 @ 6.0 28,400 @ 9.0
Minimum 15,600 @ 3.0 23,600 @ 6.0 35,400 @ 9.0 53,000 @ 12.0 70,600 @ 16.0 70,600 @ 16.0 88,000 @ 20.0 88,000 @ 20.0 13,600 @ 3.0 23,600 @ 6.0
Amount of Media (Cu. Ft.) 0.85 1.0 1.5 2.5 3.0 3.0 4.0 4.0 0.66 1.0
Maximum Water Hardness (GPG) 50 75 100 100 100 100 100 100 50 75
2
Maximum Iron (PPM) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Minimum pH Required 7 7 7 7 7 7 7 7 7 7
3
Peak Flow Rate (GPM @ P-PSI) 11.4 @ 15.0 17.1 @ 15.0 14.3 @ 15.0 18.5 @ 15.0 19.0 @ 15.0 33 @ 25.0 19.2 @ 15.0 36 @ 25.0 12.2 @ 15.0 17.1 @ 15.0
Continuous Flow Rate (GPM @ P-PSI) 5.0 @ 5.4 5.0 @ 2.8 5.0 @ 3.8 5.0 @ 2.4 5.0 @ 1.7 24 @ 15.0 5.0 @ 1.6 25 @ 15.0 5.8 @ 5.4 5.0 @ 2.8
Water Pressure Range (PSI) 25-100 25-100 25-100 25-100 25-100 25-100 25-100 25-100 25-100 25-100
Water Temp. (ºF) 33-100 33-100 33-100 33-100 33-100 33-100 33-100 33-100 33-100 33-100
Electrical Requirements (volts-hertz) 110-50/60 110-50/60 110-50/60 110-50/60 110-50/60 110-50/60 110-50/60 110-50/60 110-50/60 110-50/60
Pipe Size 1" 1" 1" 1" 1" 1.25" 1" 1.25" 1" 1"
Total Dimensions: Media Tank 8"W X 52"H 10"W X 52"H 10"W X 62"H 13"W x 62"H 14"W x 73"H 14"W x 73"H 16"W x 73"H 16"W x 73"H 13.5"W x 13.5"W x
Brine Tank 18"W X 33"H 18"W X 33"H 18"W X 33"H 18"W x 40"H 18"W x 40"H 18"W x 40"H 24"W x 41"H 24"W x 41"H 42.5"H 42.5"H
Depth 22.5" 22.5"
CAPACITY SPECIFICATIONS
1
All Impression Plus units are factory set for Medium Salting.
2
Iron removal may vary depending on form of iron, pH, and other local conditions.
3
The peak flow rates listed above do not represent the maximum service flow rate used for
determining the softener capacity and efficiency ratings. Continuous operation at flow rates
greater than the maximum service flow rate may affect capacity and efficiency performances.
SPECIFICATIONS: