Technical Specifications

ManualsBrandsWater Creation ManualsDrain PartsAll Exposed Fully Finished Lift and Turn Waste and Overflow in Polished Chrome

Page 1 of 1

ASSEMBLY DIAGRAM

OVERFLOW PIPE

OVERFLOW RUBBER GASKET

(Tapered or Flat Side depending

on slope of bathtub wall)

BATHTUB WALL

OVERFLOW COVER

OVERFLOW

COVER SCREW

LIFT & TURN

DRAIN

** Important Note **

Our bathtubs are Double Wall Construction. The drain

needs to be installed with Silicone, not Plumber’s Putty.

Using plumbers putty will not seal the two bathtub

layers properly. Using Silicone on the drain threads and

drain cavity will completely seal the drain connection to

the bathtub.

* Please see the bathtub user guide for

complete installation instructions

BATHTUB FLOOR

DRAIN RUBBER

GASKET

SLIP NUT

NYLON COMPRESSION

WASHER

NYLON COMPRESSION

WASHER

UNION

(Apply thread tape to

each threaded end prior

to attaching slip nut)

NYLON COMPRESSION

WASHER

SLIP NUT

WASTE PIPE

VERTICAL DRAIN

PIPE

TRIM TO REQUIRED

LENGTH

TRIM TO REQUIRED

LENGTH

TRIM TO REQUIRED

LENGTH

ESCUTCHEON

WO-0001 WASTE & OVERFLOW

Summary of content (2 pages)

PAGE 1
WO-0001 WASTE & OVERFLOW ASSEMBLY DIAGRAM OVERFLOW RUBBER GASKET (Tapered or Flat Side depending on slope of bathtub wall) BATHTUB WALL OVERFLOW COVER OVERFLOW COVER SCREW OVERFLOW PIPE ** Important Note ** TRIM TO REQUIRED LENGTH SLIP NUT NYLON COMPRESSION WASHER Our bathtubs are Double Wall Construction. The drain needs to be installed with Silicone, not Plumber’s Putty. Using plumbers putty will not seal the two bathtub layers properly.
PAGE 2
WO-0001 WASTE & OVERFLOW SPECIFICATION SHEET 10 ½˝ MAX OVERFLOW COVER PLATE DIA = 3˝ 16˝ PIPE 19˝ MAX 26˝ MAX DIA 1 ½˝ DRAIN THREAD HEIGHT = 1 ½˝ DIA 1 ½˝ 7˝ MAX 6˝ PIPE 9 ½˝ PIPE DIA 1 ½˝ DIA 3˝ Page 1 of 1 DRAIN DIA = 3˝