Installation Guide

- 6 -
5B
6
APPLY SEALANT
INSTALL COUNTERTOP
INSTALL FAUCET
TOP OF CABINET
APPLY SEALANT
ON TOP THREE
SIDES OF RIM
8
7
B
C
ASSEMBLE AND INSTALL P-TRAP AND DRAIN CONNECTIONS
For Under Countertop Sinks: Clean the sink
apron and top rim of all debris. Ensure that
the surface on underside of countertop cutout
opening is smooth and free of debris. Under
countertop installation requires a generous
bead of sealant around the sink top rim where
sink and countertop underside will make contact.
Carefully position and install the countertop. Ensure the sealant provides a complete seal between the sink and
the countertop surface. Fill any voids and remove excess.
Assemble and install P-trap drain connections in accordance
with manufacturer’s instructions. Connect trap to drain
assembly hand tight to check alignment. It may be
necessary to cut o part of the tailpiece (area "B") or part of
the horizontal leg of the trap (area "C" ). Secure joints for
watertight assembly.
Carefully locate and install faucet to countertop in accordance with manufacturer’s instructions.
Ensure you provide adequate clearance for supply lines and faucet operation.
Connect supply lines to shuto valves. Turn on water supply valves and water-test installation.