Installation Guide

MODEL: EMPIRE60 72 / EMBASSY60 72
INSTALLATION STEP
1) Assemble the back support as shown. Tighten set screws on the escutcheons
and 3-way joints.
2) Assemble support legs as shown. Use a level to ensure the top
escutcheons are straight. Tighten set screws on the 3-way joints, 4-way joints,
5-way joint and all escutcheons.
3) After assembling both sides support legs and central support leg, attach
front bars to join legs together and tighten set screws.
4) With one person on either side of assembled sta
nd, carefully position the
wash stand in desired location. Use a pencil mark position of wall
escutcheon screw holes on wall as well as the perimeter of the location of
foot flanges on floor.
5) Thread the floor screws with foot flanges and screw it into floor.
6) Drill holes on wall for wall escutcheons and push anchors flush with wall
7) Insert the support legs into foot flanges and fasten wash stand to wall with
mounting screws.
8) Apply a thin coat of silicone on the
top flanges to secure the counter top to
stand.
(If counter top need slight leveling adjustment, place attached sponge pads
on escutcheons as necessary to stabilize.)
D
A
E