Use and Care Manual

MODEL: EMPIRE30 / EMBASSY30

INSTALLATION STEP

1) Assemble the back support as shown. Tighten set screw on the escutcheon

and 3-way joint.

2) Assemble support legs as shown. Use a level to ensure the top

escutcheons are straight. Tighten set screws on the 3-way joints, 4-way joints

and all escutcheons.

3) After assembling both sides support legs, attach front bar to join both sides

and tighten set screw.

4) With one person on either side of assembled stand, carefully position the

wash stand in desired locatio

n. Use a pencil mark position of wall

escutcheon screw holes on wall as well as the perimeter of the location of

foot flanges on floor.

5) Thread the floor screws with foot flange and screw it into floor.

6) Drill holes on wall for wall escutcheons and push anchors flush with wall

7) Insert the support legs into foot flanges and fasten wash stand to wall with

mounting screws.

8) Apply a thin coat of silicone on the top flanges to secure the counter top to

stand.

(If counter top nee

d slight leveling adjustment, place attached sponge pads

on escutcheons as necessary to stabilize.)