Use and Care Manual

Page 10 of 16
•
Connect hose and regulator to cylinder
•
The propane gas and cylinder are sold separately.
Use a standard 20 lb. propane cylinder only.
•
Use this heater only with a propane vapor withdrawal
supply system.
•
Storage of an appliance indoors is permissible only if the cylinder is
disconnected and removed from the Standard 20 lb. tank appliance.
•
A cylinder must be stored outdoors in a well-ventilated area out of the
reach of children. A disconnected cylinder must have dust caps tightly
installed and must not be stored in a building, garage or any other
enclosed area.
•
The cylinder must have a listed overfilling prevention device.
The cylinder must have a connection device compatible with the
connection for the appliance.
•
•
Only install the type of dust cap on the cylinder valve that is provided with
the cylinder valve. Other type of caps or plugs may result in leakage of
propane.
•
The cylinder used must include a collar to protect the cylinder valve.
Never connect an unregulated propane cylinder to the heater. Attach
regulator to cylinder. Complete attachment. Fasten cylinder with strap,
install cylinder.
•
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED
FOR RESIDENTIAL USE ONLY.
Operation
Standard 20 lb. tank
Place the dust cap on the cylinder valve outlet whenever the cylinder is not
in use.