Use and Care Manual

Page 8 of
16
Step 1:
1. Check that the Control Knob for the
gas supply system is turned to the "OFF''
position before starting any assembly.
2. Place a 20 lb Propane Gas Tank (not
included) into a secure position.
Step 2:
Turn the Cylinder Valve on the tank in a
clockwise direction to TURN OFF SUPPLEY of
the LP Gas supply-Attach the preassembled
Regulator (19) from the Fire Table to the
Cylinder Valve (21) by turning the Black
Regulator Coupling Nut clockwise.
Make sure it is fastened securely and tighten
connections-by HAND only.
User's Instructions