Specification

TECHNICAL DATA
WATCO
®
TEAK OIL
Rust-Oleum Corporation Form: JPB-29
11 Hawthorn Parkway Phone: [phone] Rev.: 012114
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
,PHYSICAL PROPERTIES .
TEAK OIL Finish
Resin Type
Oil-Phenolic Rosin Ester
Pigment Type
NA
Solvents
Mineral Spirits
Weight
Per Gallon
7.0 – 7.1 lbs.
Per Liter
0.84 – 0.85 kg
Solids
By Weight
48.1 – 49.1
By Volume
40.6 – 42.6
Volatile Organic Compounds
434 g/l (3.62 lbs. /gal.)
Theoretical Coverage at
1 mil DFT (25µ)
660-680 sq ft/gal (16-17m2/l)
Practical Coverage at
Recommended DFT (assumes 15%
material loss)
560– 575 sq ft/gal (13.5-14m2/l)
Dry Times at 70°F
(21°C) and 50%
Relative Humidity
Tack Free
8 Hours
Handle
10 Hours
Recoat
30 Hours
Dry Heat Resistance
212°F (100°F)
Shelf Life
3 years
Safety
information
Flash Point
106°F (41°C) Seta flash
Contains
No lead has been deliberately added.
Warning!
CONTAINS: PETROLEUM DISTILLATES
WARNING. VAPOR MAY BE HARMFUL IF INHALED. KEEP AWAY FROM OPEN
FLAME. HARMFUL IF SWALLOWED. MAY CAUSE EYE AND SKIN IRRITATION. WEAR
EYE PROTECTION AND PROTECTIVE CLOTHING. REFER TO MATERIAL SAFETY
DATA SHEET FOR ADDITIONAL INFORMATION.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.