Technical Specifications

TECHNICAL DATA
WAT-10
WATCO
®
EXTERIOR WOOD FINISH
Rust-Oleum Corporation Form: GDH-925
11 Hawthorn Parkway Phone: [phone] Rev.: 052518
Vernon Hills, Illinois 60061 www.rustoleum.com
,PHYSICAL PROPERTIES .
EXTERIOR WOOD FINISH
Resin Type
Linseed Oil and Phenolic Rosin Ester
Pigment Type
NA
Solvents
Mineral Spirits
Weight
Per Gallon
7.2 lbs.
Per Liter
0.87 kg
Solids
By Weight
48.1%
By Volume
41.9%
Volatile Organic Compounds
450 g/l (3.75 lbs./gal.)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
560-680 sq.ft./gal. (13.8-16.7 m
2
/l)
Varies with type and porosity of wood
Dry Times at 70-80°F (21-27°C) and
50% Relative Humidity
8-10 hours
Shelf Life
3 years
Flash Point
105°F (40°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.