Specification

TECHNICAL DATA
WAT-05
WATCO
®
REJUVENATING OIL
Rust-Oleum Corporation Form: GDH-02
11 Hawthorn Parkway Phone: [phone] Rev.: 070714
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
,PHYSICAL PROPERTIES .
REJUVENATING OIL
Resin Type
Urethane-modified Linseed Oil
Pigment Type
None
Solvents
Mineral spirits
Weight
Per Gallon
7.1 lbs.
Per Liter
0.85 kg
Solids
By Weight
45.0%
By Volume
40.4%
Volatile Organic Compounds
458 g/l
Recommended Dry Film
Thickness (DFT) Per Coat
NA
Wet Film to Achieve DFT
(unthinned material)
NA
Theoretical Coverage at
1 mil DFT (25µ)
648 sq.ft./gal.
Practical Coverage at Recommended
DFT (assumes 15% material loss)
50-75 sq.ft./quart (Varies with type and porosity of wood)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
10 minutes
Apply Wax
72 hours
Shelf Life
3 years
Flash Point
104°F (40°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.