Technical Specifications

Overow Elbow
Strainer
Cover
Plate
Drain Elbow Gasket
Drain
Elbow
Overow Gasket
Retainer Plate Screws
Retainer Plate
Overow
Plate
Overow Plate
Screws
Te e
Slip Joint Polywasher
Slip Joint Nut
Drain Tube
Slip Joint
Polywasher
Slip Joint Nut
Strainer Cover
Plate Screw
Strainer
Body
Overow
Tube
Drop
Cylinder
Linkage
Watco Manufacturing Co.
Trip Lever Installation Instructions
See next panel for trip lever variations.
TL-TS Inst Rev. 5/12
Step 1. 
Step 2. 
For solvent-weld ttings (Schedule 40): Follow the instructions on the solvent cement container, using the appropriate solvent


For slip joint ttings (brass or tubular plastic):


Step 3. 
Caution: Avoid contact of plumber’s putty with ABS plastic parts.
Step 4. 

Step 5. 


Step 6. QUICK

®,

Step 7. 


Slip Joint Polywasher or
Brass Ferrule
Model 500-TL / Model 550-TL Models 501/502-TL / 551/552-TL Model 600-TL / Model 650-TL
Overow Elbow
Overow Gasket
Retainer Plate
Screws
Retainer
Plate
Overow Plate
Overow Plate
Screws
Slip Joint Nut
Overow
Tube
Slip Joint Nut
Slip Joint Polywasher or
Brass Ferrule
Te e
Drop
Cylinder
Linkage
Strainer Cover
Plate
Drain Elbow
Gasket
Drain Elbow
Drain Tube
Strainer Cover
Plate Screw
Strainer Body
Tailpiece
Overow Elbow
Overow Gasket
Retainer Plate
Retainer Plate
Screws
Overow
Tube
Te e
Drain Tube
Drop
Cylinder
Strainer Cover
Plate
Drain Elbow
Gasket
Drain Elbow
Strainer Body
Strainer Cover Plate
Screw
Linkage
Overow Plate
Overow Plate
Screws
Linkage Nut
Linkage Nut
Linkage Nut
IMPORTANT!
On Schedule 40 trip lever bath wastes,
the arrow on tee must be pointing down.
Do not allow solvent cement to enter tee cavity.
WATCO MANUFACTURING COMPANY
1220 South Powell Road • Independence, MO 64057-2724
Phone: [phone] • 800-821-8576
Fax: [phone] • 800-399-2826
www.watcomfg.com
®
WATCO
Always A Step Ahead
WIRE-TL-TS-SL Rev. 5/12 • Printed in U.S.A.
Watco Manufacturing Co.
Trip Lever Installation Instructions for
QUICK ADJUST
®
• SLIP LOCK
®
• TURNSTYLE
®
See previous panel for general trip lever instructions.
QUICK ADJUST
®
Trip Lever SLIP LOCK
®
Trip Lever
TURNSTYLE
®
Trip Lever
A.

B.



B.
All trip-lever
drains:
Make sure brass
linkage is not
kinked.
CORRECT
INCORRECT
Drawing B
Drawing A
Typical installation
for QUICK ADJUST
®
bath wastes.
A
B
C
D
SLIP LOCK
®
4-PRONG DEVICE
RELEASE BUTTON
WIRE LOOP ASSY.
DROP CYLINDER
1
2
3
4
5
1
2
3
4
5
6
9
7
8
IMPORTANT!
On Schedule 40 trip lever bath wastes,
the arrow on tee must be pointing down.
Do not allow solvent cement to enter tee cavity.
SLIP LOCK
®
Installation:


A.


B.

C.


D.


®



TURNSTYLE
®
Installation:


1. 

2. 
3. word
 AND the 

4. 
9
8
1
2
3
4
5
6
9
7
8
2
WIRE C
For taller drains:


on pipe where pipe meets the


WATCO MANUFACTURING COMPANY
1220 South Powell Road • Independence, MO 64057-2724
Phone: [phone] • 800-821-8576
Fax: [phone] • 800-399-2826
www.watcomfg.com
®
WATCO
Always A Step Ahead