Technical Specifications

TECHNICAL DATA
WAT-04
WATCO
®
BUTCHER BLOCK OIL & FINISH
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877∙385∙8155
www.rustoleum.com
Form: GDH-638
Rev.: 012618
PHYSICAL PROPERTIES
WATCO BUTCHER BLOCK
Resin Type
Tung Oil Alkyd
Pigment Type
None
Solvents
Mineral Spirits
Weight
Per Gallon
7.5 lbs.
Per Liter
0.90 kg
Solids
By Weight
36.0%
By Volume
28.2%
Volatile Organic Compounds
<580g/l (4.8 lbs./gal.)
Recommended Dry Film
Thickness (DFT) per Coat
NA
Practical Coverage at Recommended
DFT (assume 15% material loss)
Varies with type and porosity of wood
Dry Times at 70-80°F
(21-27ºC) and 50%
Relative Humidity
Touch
2 hours
Recoat
6 hours
Normal Use
72 hours
Shelf Life
3 years
Flash Point
150°F (40°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.