How to Guide

TECHNICAL DATA
WAT-04
WATCO
®
BUTCHER BLOCK OIL & FINISH
Rust-Oleum Corporation Form: GDH-638
11 Hawthorn Parkway Phone: [phone] Rev.: 061215
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
,PHYSICAL PROPERTIES .
WATCO BUTCHER BLOCK
Resin Type
Tung Oil Alkyd
Pigment Type
None
Solvents
Mineral Spirits
Weight
Per Gallon
7.5 lbs.
Per Liter
0.90 kg
Solids
By Weight
36.0%
By Volume
28.2%
Volatile Organic Compounds
<580 g/l (4.8 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
NA
Practical Coverage at Recommended DFT
(assumes 15% material loss)
Varies with type and porosity of wood.
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2 hours
Recoat
6 hours
Normal Use
72 hours
Shelf Life
3 years
Flash Point
105°F (40°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.