User guide

Setting up the Wireless Access Point
User Guide 79
Setting up the Wireless Access Point
To make sure that your network is secure, WatchGuard disables the
wireless feature of the Firebox® X Edge Wireless until you activate
wireless traffic. You can activate the wireless feature when you con-
figure the security of the wireless connections.
1 To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
1 From the navigation bar, select
Network > Wireless (802.11g).
The Wireless Network Configuration page appears.
Configuring basic settings
The SSID (Service Set Identifier) is the sequence of characters that
gives your Wireless network a unique name. You must configure the
wireless network card in your computer to have the same SSID so
your computer can send traffic to the Firebox X Edge Wireless.