User guide

Changing Your Network Settings
72 WatchGuard Firebox X Edge
If you selected PPPoE
See “If your ISP uses PPPoE” on page 49 for information on PPPoE
settings and configure WAN2 with this information.
If you are using an external modem for failover
If failover occurs, the Edge can find a remote secondary host for
sending traffic with a modem. We support these modems:
• Hayes 56K V.90 serial fax modem
• Zoom FaxModem 56K model 2949
• U.S. Robotics 5686 external modem
• Creative Modem Blaster V.92 serial modem
• MultiTech 56K Data/Fax Modem International
1 From the drop-down list on the WAN Failover page, select
Modem (serial port).
2 Below Dial Up Account Settings, use the drop-down list to
select your ISP. We support these ISPs: Standard PPP, AT&T
Worldnet, CompuServe 4.0, EarthLink, and MSN.
3 Type the telephone number of your ISP. You can also type an
alternate telephone number.
4 Type the account name used by your ISP for your modem.
5 (Optional) If you log in to your account with a domain name
(such as msn.com), enter it in Account Domain.
6 Type the account password.