User guide

Enabling the WAN Failover Option
User Guide 71
6 Type the maximum number of pings before time-out in the
related field.
If you are using a broadband connection for failover
If you selected to enable failover with a broadband connection on
WAN2, select your configuration mode from the drop-down list.
If you selected DHCP Client
If your ISP makes you identify your computer to give you an IP
address, type this name in the Optional DHCP Identifier field.
If you selected Manual Configuration
1 Type the IP address, subnet mask, default gateway, primary
DNS, secondary DNS, and DNS domain suffix into the related
fields. Get this information from your ISP or corporate network
administrator.
If you completed the table on page 15, type the information from the
table.
2 Click Submit.