User guide

Configuration and Management Basics
40 WatchGuard Firebox X Edge
download completes, use the procedure below to update your Fire-
box software:
1 To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
2 At the bottom of the System Status page, click Update.
3 Type the name of the file that contains the new Firebox X Edge
software in the Select text box or click Browse to find the file
on your local computer.
4 Click Update.
The Firebox makes sure the software package is a legitimate software
upgrade. It then copies the new software to the system. This can take 15
to 45 seconds. When the update is complete, click the Reboot button
that appears on the Update page. After the Firebox restarts, the System
Status page appears and shows the new version number.
Factory Default Settings
The term “ factory default settings” refers to the configuration on
the Firebox® X Edge when you first receive it—before you make
changes to the configuration file. The default network and configu-
ration properties for the Firebox X Edge are as follows:
Trusted network
- The default IP address for the trusted network is 192.168.111.1.
The subnet mask for the trusted network is 255.255.255.0.
- The Firebox X Edge is configured to give IP addresses to
computers on the trusted network through DHCP. You can also