User guide

Configuration and Management Basics
28 WatchGuard Firebox X Edge
Navigating the Configuration Pages
You use the configuration pages for all procedures to configure the
Firebox® X Edge. The System Status page, the primary navigation
page, appears below.
In this User Guide, most procedures start with this step:
“To connect to the System Status page, type https:// in the browser
address bar, and the IP address of the Edge trusted interface. The
default URL is: https://192.168.111.1.”
The function of the step is to open your Firebox system configura-
tion pages. You can change the IP address of the trusted network
from https://192.168.111.1 to a different IP address if necessary. For
more information, see “Configuring the Trusted Network” on
page 53.