User guide

Installing the Firebox X Edge
16 WatchGuard Firebox X Edge
To find your TCP/IP properties, use the instructions for your com-
puter operating system.
Microsoft Windows 2000, Windows 2003 and
Windows XP
1 Click Start > Programs > Accessories > Command Prompt.
2 At the MS-DOS prompt, type ipconfig /all and then press
Enter.
3 Record the values in Your TCP/IP Properties Table on page 15.
4 Close the window.
Microsoft Windows NT
1 Click Start > Programs > Command Prompt.
2 At the MS-DOS prompt, type ipconfig /all and then press
Enter.
3 Record the values in Your TCP/IP Properties Table on page 15.
4 Close the window.
Microsoft Windows 98 or ME
1 Click Start > Run.
2 At the MS-DOS prompt, type winipcfg and then press Enter.
3 Click OK.
4 Select the Ethernet Adapter.
5 Record the values in Your TCP/IP Properties Table on page 15.
6 Click Cancel.
Macintosh OS 9
1 Click the Apple menu > Control Panels > TCP/IP.
2 Record the values in Your TCP/IP Properties Table on page 15.
3 Close the window.