User guide

Installing the Firebox X Edge
12 WatchGuard Firebox X Edge
• A power cable clip
Use this clip to attach the cable to the side of the Edge. It decreases the
tension on the power cable.
• One straight-through Ethernet cable
• A wall mount plate (Wireless models only)
• Two antennae (Wireless models only)
Installation Requirements
The Firebox® X Edge installation requirements are:
• A computer with a 10/100BaseT Ethernet network interface
card to configure the Firebox.
• A Web browser. You can use Netscape 7.0 (or later), Internet
Explorer 6.0 (or later), or an equivalent browser.
• The serial number of the Firebox X Edge.
You can find the serial number on the bottom of the Firebox. You use
the serial number to register the Edge.