User guide

User Guide 11
CHAPTER 2 Installing the
Firebox X Edge
To install the WatchGuard® Firebox® X Edge in your network, you must
complete these steps:
• Identify and record the TCP/IP properties for your Internet
connection.
• Disable the HTTP proxy properties of your Web browser.
• Connect the Firebox X Edge to your network.
• Connect your computer to the Edge.
• Use the Quick Setup Wizard to configure the Edge.
• Activate the LiveSecurity® Service.
Package Contents
Make sure that the package for your Firebox® X Edge includes these
items:
• The Firebox X Edge QuickStart Guide
• A LiveSecurity® Service activation card
• A Hardware Warranty Card
• An AC power adapter (12 V)