User guide

Managing the Firebox and User Accounts
190 WatchGuard Firebox X Edge
Configuring MUVPN client settings
The MUVPN client settings apply to all MUVPN connections to the
Edge. To configure MUVPN client settings:
1 Use your browser to connect to the System Status page. From
the navigation bar, select Firebox Users > Settings.
The Settings page appears.
2 If necessary, use the scroll bar to scroll to the Firebox User
Common MUVPN Client Settings section.
3 You can lock the MUVPN client security policy (.wgx file) to
prevent a change to it. Select the Make the MUVPN client
security policy read-only check box.
4 The remote MUVPN computers can use a virtual adapter to get
network settings, an IP address, and WINS and DNS address
assignments. You can set the virtual adapter rule for your
mobile users to:
Disabled
The mobile user does not use a virtual adapter to connect with
the MUVPN client. This is the default value.
Preferred
If the virtual adapter is in use or is not available, the mobile user
does not use a virtual adapter to connect with the MUVPN
client.
Required
The mobile user must use a virtual adapter to connect with the
MUVPN client.
5 You can also enter a WINS Server address and DNS Server
address. Type the server IP addresses in the related field.
For more information on configuring the Mobile User VPN client
computer, see Chapter 10, “Configuring the MUVPN Client.”
Adding or Editing a User Account
When you create a Firebox user for the Firebox® X Edge, you select
the Administrative Access level for that user. You select access con-
trol for the external network and the Branch Office VPN tunnel, and