User guide

Tips for Configuring the Pocket PC
User Guide 177
The wireless MUVPN client cannot connect to the Internet, the
computers on the optional network, or any other network that
the Edge has a connection to.
All networks
This is the usual configuration for wireless MUVPN clients. The
wireless MUVPN client can connect to:
- The trusted network
- The optional network
- Networks behind static routes
- Networks on the other side of a Branch Office VPN
- The external network (usually the Internet)
You can configure some Firebox users to connect only to the trusted
network, and other Firebox users to connect to all networks:
1 To allow a Firebox user to only connect to the trusted network,
do not select the check box All traffic uses tunnel (0.0.0.0/0 IP
Subnet) in the Firebox user’s MUVPN setup.
2 To allow a Firebox user to connect to all networks through the
VPN tunnel, select the check box All traffic uses tunnel
(0.0.0.0/0 IP Subnet) in the Firebox user’s MUVPN setup.
To make wireless computers authenticate as MUVPN clients:
1 To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1.
2 From the navigation bar, select Network > Wireless.
3 Select the check box Require encrypted MUVPN connections
for wireless clients.
4 Click Submit.
Tips for Configuring the Pocket PC
WatchGuard does not supply a Mobile User VPN software package
for the Pocket PC. You must use the software manufacturer’s
instructions to configure their software and the Pocket PC.
The Firebox® X Edge only allows connections that use IPSec. The
Edge does not support PPTP VPN tunnels.