User guide

Connecting and Disconnecting the MUVPN Client
User Guide 171
The MUVPN client started one or more secure MUVPN tunnels.
The green bar on the right of the icon tells you that the client is
only sending data that is secure.
Activated, Connected, and Transmitting both Secured and
Unsecured Data
The MUVPN client started one or more secure MUVPN tunnels.
The green and red bars on the right of the icon tell you that the
client is sending data that is secure and data that is not secure.
Allowing the MUVPN client through a personal firewall
To create the MUVPN tunnel, you must allow these programs
through the personal firewall:
• MuvpnConnect.exe
•IreIKE.exe
The personal firewall detects when these programs try to get access
to the Internet. A New Program alert window appears to request
access for the MuvpnConnect.exe program.
From the New Program alert window:
1 Select the Remember this answer the next time I use this
program check box, then click Yes.
This option lets the ZoneAlarm personal firewall allow Internet access for
this program each time you start a MUVPN connection.
The New Program alert window appears to request access for the
IreIKE.exe program.
2 Set the Remember this answer the next time I use this
program check box, then click Yes.
This option lets the ZoneAlarm personal firewall allow Internet access for
this program each time you start a MUVPN connection.
Disconnecting the MUVPN client
From the Windows desktop system tray:
1 Right-click the MUVPN client icon and select Deactivate
Security Policy.
The MUVPN client icon with a red bar is displayed.
2 If the ZoneAlarm personal firewall is active, deactivate it now.
From the Windows desktop system tray: