User guide

Configuring the MUVPN Client
166 WatchGuard Firebox X Edge
Configuring the WINS and DNS settings
The remote computer must be able to connect to the WINS and DNS
servers. These servers are on the trusted network of the Firebox X
Edge.
From the connection window Networking tab:
1 Select the Internet Protocol (TCP/IP) component.
2 Click Properties.
The Internet Protocol (TCP/IP) Properties window appears.
3 Click Advanced.
The Advanced TCP/IP Settings window appears.
4 Click the DNS tab and then, from the section labeled DNS
server addresses, in order of use, click Add.
The TCP/IP DNS Server window appears.
5 Type the IP address of the DNS server in the related field. Click
Add.
To add more DNS servers, repeat steps 4 and 5.
NOTE
The DNS server on the private network of the Firebox X Edge must
be the first server in the list.
6 Select the Append these DNS suffixes (in order) check box.
Click Add.
The TCP/IP Domain Suffix window appears.
7 Enter the domain suffix for your network’s private domain in
the related field.
To add more DNS suffixes, repeat step 6.
8 Click the WINS tab and in the section WINS addresses, in order
of use, click Add.
The TCP/IP WINS Server window appears.
9 Type the IP address of the WINS server in the related field. Click
Add.
To add more WINS servers, repeat steps 8 and 9.
10 Click OK to close the Advanced TCP/IP Settings window. Click
OK to close the Internet Protocol (TCP/IP) Properties window,
and then click OK.
11 Click Cancel to close the connection window.