User guide

Configuring the MUVPN Client
164 WatchGuard Firebox X Edge
From the connection window Networking tab:
1 Select the Internet Protocol (TCP/IP) component and click
Properties.
The Internet Protocol (TCP/IP) Properties window appears.
2 Click Advanced.
The Advanced TCP/IP Settings window appears.
3 Click the DNS tab and from the section labeled DNS server
addresses, in order of use, click Add.
The TCP/IP DNS Server window appears.
4 Type the IP address of the DNS server and click Add.
To add more DNS servers, repeat steps 3 and 4.
NOTE
The DNS server on the private network of the Firebox X Edge must
be the first server in the list.
5 Select the Append these DNS suffixes (in order) check box and
click Add.
The TCP/IP Domain Suffix window appears.
6 Type the domain suffix in the applicable field.
To add additional DNS suffixes, go back to step 5.
7 Click the WINS tab and then from the section WINS addresses,
in order of use, click Add.
The TCP/IP WINS Server window appears.
8 Type the IP address of the WINS server in the applicable field.
Click Add.
To add more WINS servers, repeat steps 7 and 8.
9 Click OK to close the Advanced TCP/IP Settings window. Click
OK to close the Internet Protocol (TCP/IP) Properties window.
10 Click OK.
11 Click Cancel to close the connection window.
Windows XP setup
Use this section to install and configure the network components
for the Windows XP operating system. You must install these com-
ponents if you use the MUVPN client on a Windows XP computer.
From the Windows desktop:
1 Select Start > Control Panel
The Control Panel window appears.
2 Double-click the Network Connections icon.