User guide

Configuring Logging and System Time
112 WatchGuard Firebox X Edge
Category
The type of message. For example, if the message came from an
IP address or from a configuration file.
Message
The text of the message.
This procedure shows how to see the event log file:
1 To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
2 From the navigation bar, click Logging.
The Logging page appears with the Event Log at the bottom of the page.
Log to a WatchGuard Log Server
The WatchGuard® Log Server (previously known as the WatchGuard
System Event Processor or WSEP) is a component of the Watch-
Guard System Manager. If you have a Firebox® III, Firebox X Core, or
Firebox X Peak, configure the Log Server to collect the log messages
from your Firebox X Edge. For instructions on how to configure the
Log Server to accept the log messages, see the WatchGuard System
Manager User Guide. Then use these instructions to send your event
logs to the Log Server.
1 To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1