User guide

Configuring Firewall Settings
90 WatchGuard Firebox X Edge
Configuring common services for incoming traffic
The Firebox X Edge includes standard services known as common
services that you can use to control traffic through the Firebox. You
can use the procedure below to configure the properties of a com-
mon service.
For more information on the common services, refer to the list at
the end of this FAQ:
www.watchguard.com/support/Tutorials/stepsoho_blockoutservice.asp
1 To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
2 From the navigation bar, select Firewall > Incoming.
The Filter Incoming Traffic page appears.
3 Find the name of the common service to allow into your trusted
or optional network from the external network. From the Filter